Load banks play a crucial role in the new energy sector. As precise and controllable testing devices, they are widely used in various links such as research and development (R&D), production, verification, and maintenance. Their core function is to simulate real-world electricity consumption behavior, thereby verifying and optimizing new energy power generation, energy storage, and electricity consumption systems.
The following is a detailed breakdown of the applications of load banks in the new energy sector:
1. Testing and application in energy storage systems (ESS)
Energy storage systems are the core of the new energy sector, and load banks have the most in-depth and diverse applications here.
1.1 Factory testing (formation & testing) of battery packs/modules
Purpose: At the end of the battery production line, perform charge-discharge activation (formation) and performance inspection on each battery pack.
Application details: Load banks work in conjunction with power supplies to conduct precise constant current (CC), constant voltage (CV), and constant power (CP) discharge and charge cycles for batteries, completing the "initial activation" of the batteries. Meanwhile, through charge-discharge cycles, key parameters such as actual capacity, internal resistance, and efficiency (coulombic efficiency/energy efficiency) are measured to screen out unqualified products.
1.2 Testing and verification of power conversion systems (PCS)
Purpose: Inspect the conversion efficiency, stability, response speed, and protection functions of PCS under different operating conditions.
Application details:
Efficiency testing: Apply different load power levels from 10% to 100% on the load bank, accurately measure the input (DC) and output (AC) power of the PCS, and plot an efficiency curve across the full load range.
Dynamic performance testing: Simulate drastic load fluctuations (e.g., sudden drop in photovoltaic power, abrupt increase in load) to test whether the PCS can respond quickly and maintain grid stability. This is critical for energy storage systems participating in grid frequency regulation.
Islanding/grid-connected mode switching testing: Under load conditions, test whether the PCS can seamlessly switch to islanded operation mode when the grid is disconnected, and safely reconnect to the grid when the grid is restored.
1.3 Integrated testing and acceptance of energy storage systems
Purpose: Before the delivery of a complete energy storage system (including batteries, BMS, PCS, and temperature control system), verify whether its overall performance meets the contractual requirements.
Application details: Use the load bank to simulate real charge-discharge cycles (e.g., two charges and two discharges) to verify the system’s actual usable capacity, cycle efficiency, thermal management performance, and the accuracy of the BMS (Battery Management System) estimation algorithms (such as SOC/SOH).
1.4 Evaluation and sorting for battery second-life utilization
Purpose: Evaluate the performance of power batteries retired from electric vehicles and screen out batteries that can be reused in energy storage or other fields.
Application details: Use the load bank to conduct standardized charge-discharge tests on retired battery packs, accurately measuring their remaining capacity, internal resistance, and consistency. Batteries are classified based on test results to provide data support for different second-life application scenarios (e.g., home energy storage, backup power supplies).
2. Testing and application in photovoltaic (solar) power generation systems
2.1 Testing of photovoltaic inverters
Purpose: Similar to PCS testing, verify the efficiency, power quality, and reliability of photovoltaic inverters in converting DC power (from solar panels) to AC power.
Application details:
MPPT (maximum power point tracking) efficiency testing: Use a programmable DC power supply to simulate the IV curve of solar panels under different (illumination) and temperature conditions, while the load bank serves as an AC load. Test the speed and accuracy of the inverter’s maximum power point tracking.
Power quality testing: Use a load bank (especially models that can simulate non-linear loads) to test the output waveform of the inverter under harsh load conditions, and check whether its harmonic content, power factor, etc., comply with grid-connection standards.
2.2 Microgrid testing of PV-storage integrated systems
Purpose: Verify the stable operation capability of microgrids composed of photovoltaic, energy storage, load, and control systems.
Application details: The load bank is used to simulate variable loads in the microgrid. By adjusting the load size, the effectiveness of the system’s energy management strategy is tested—for example, prioritizing power supply to loads and charging the battery when photovoltaic power generation is sufficient; and using the battery to supply power to loads via the inverter when photovoltaic power generation is insufficient, realizing self-consumption of energy.
3. Testing and application in wind power generation systems
3.1 Testing of wind power converters
Purpose: Wind power output is unstable, placing high demands on converters. Load banks are used to test the performance of converters under wide-range power fluctuations.
Application details: Simulate changes in wind speed to cause the converter’s output power to fluctuate rapidly from zero to rated power. Use the load bank to inspect the converter’s stability, efficiency, and grid fault ride-through (low-voltage ride-through) capability.
3.2 Testing of wind turbine blade De-icing systems
Purpose: In cold regions, wind turbine blades require electric heating de-icing systems. Load banks can be used to test the power consumption and reliability of these heating systems.
Application details: Treat the blade heater as a load, and use the load bank to test its power and current under different voltages, ensuring reasonable design and avoiding excessive impact on the wind turbine’s power grid.
4. Testing of electric vehicles (EV) and related infrastructure
4.1 Testing of on-board chargers (OBC) and DC-DC converters
Purpose: During R&D and production, verify the performance of OBC (which charges the battery with AC power) and DC-DC converters (which convert high-voltage battery power to low-voltage power for on-board equipment).
Application details: Use an AC load bank to test the input characteristics of the OBC (such as power factor, harmonics), and use a DC load bank to simulate the battery and test its output characteristics (such as voltage regulation accuracy, efficiency).
4.2 Testing and certification of charging piles (charging stations)
Purpose: Verify the output capability, communication protocol compatibility, and safety of charging piles.
Application details:
Output performance testing: Use the load bank to simulate an EV battery, testing the output accuracy, efficiency, and temperature rise of the charging pile under different charging power levels.
Interoperability testing: The load bank can simulate the charging requirements of different vehicle models (via communication protocols such as CCS/CHAdeMO/GB/T), testing whether the charging pile can correctly identify and establish a connection to complete the charging process.
Durability testing: Conduct long-term full-load testing on the charging pile to inspect its reliability and service life.
5. Testing in the hydrogen and fuel cell sector
5.1 Testing of fuel cell stacks/systems
Purpose: The output characteristics of fuel cells are relatively "soft" and require connection to a load for stable operation. Load banks are core equipment in fuel cell test benches.
Application details:
Polarization curve testing: By adjusting the current of the load bank, measure the voltage and power output of the fuel cell, and plot its core performance curve—the polarization curve—which is key to evaluating fuel cell performance.
Dynamic response testing: Simulate operating conditions such as vehicle acceleration and deceleration to test the response speed of the fuel cell system to load changes and the effectiveness of its control strategy.
Life testing: Conduct long-term constant-current or variable-condition cycle testing to evaluate the degradation of the fuel cell.
Summary
The application of load banks in the new energy sector can be summarized as a bridge connecting "virtual simulation" and "real-world operation":
Virtual loads, real data: It simulates ever-changing real electricity consumption scenarios (from households to power grids) in a controllable manner, providing a repeatable and quantifiable testing environment for new energy equipment.
Full-Lifecycle coverage: From R&D and production of core components to acceptance and deployment of system integration, and further to later maintenance and evaluation, load banks provide key data support.
Ensuring safety, enhancing efficiency, driving innovation: Through rigorous testing, they ensure the safety and reliability of new energy systems during grid connection and operation, help optimize system design to improve energy conversion efficiency, and accelerate the implementation and application of new technologies.
Therefore, load banks are indispensable foundational tools for supporting the rapid development and large-scale application of new energy technologies.