Q1: Why do diesel generators need load bank testing?
A: Diesel generators often suffer from wet stacking and carbon deposit if running under no-load or light-load conditions for a long time. Load bank full-load testing burns out accumulated carbon, verifies real output power and ensures stable operation under rated load. HOZA Load Bank provides dedicated plug-and-play models for regular generator maintenance testing.
Q2: How much load percentage is required for generator commissioning?
A: Standard generator commissioning requires 100% rated load run for 2-4 hours and 110% overload test for 1 hour per IEEE standard. Light-load testing cannot detect hidden winding and fuel system defects. HOZA configures segmented load adjustment to meet full-range percentage testing requirements for generators.
Q3: Can I use a portable load bank for on-site generator testing?
A: Yes, portable resistive load banks are the most common solution for mobile on-site generator inspection. They are lightweight, easy to transport and fast to connect for temporary construction sites and rental fleets. HOZA portable load banks support 50kW-2000kW range for flexible on-site generator commissioning.
Q4: Resistive vs resistive-inductive load bank for generator testing?
A: Resistive models only test active power for basic generator capacity verification. Resistive-inductive units simulate 0.8 power factor working condition to test reactive power performance, which is required for formal factory acceptance. HOZA provides both types to match routine and standard generator testing scenarios.
Q5: Portable vs container load bank for generator fleet maintenance?
A: Portable units suit scattered, frequent mobile testing for rental generator fleets. Containerized load banks are designed for fixed large-scale generator bases with long-term continuous operation. HOZA offers customized combination packages for fleet owners to balance mobility and power capacity.
Q6: 400V vs 690V load bank for industrial diesel generators?
A: 400V load banks fit most small and medium industrial generators for conventional testing. 690V models are mandatory for high-power industrial diesel generators to match native output voltage and avoid conversion loss. HOZA dual-voltage load banks support automatic switching for both voltage generator tests.
Q7: What happens if a generator skips annual load bank testing?
A: Without annual load testing, carbon accumulation will reduce generator efficiency, increase fuel consumption and cause unexpected shutdown under full load. Severe carbon deposition may even lead to exhaust system fire risks. HOZA recommends quarterly light-load and annual full-load testing plans for generator assets.
Q8: Why do cheap load banks cause generator voltage fluctuation?
A: Low-cost load banks use unbalanced resistor modules and poor contactors, leading to unstable load switching and sudden voltage surges during testing. This may damage the generator AVR control system permanently. HOZA adopts balanced modular resistors and imported contactors to ensure stable generator test data.
Q9: What mistake to avoid when sizing a load bank for a generator?
A: The most common mistake is matching the load bank only to the generator standby power instead of prime power. This leads to insufficient overload capacity and failed official acceptance. HOZA technical team calculates the exact load bank capacity based on generator prime power to avoid testing failure.